|
|
|
|
|
In addition to lifting and hauling loads, the PWB Anchor Tugger Wire Rope Winch is ideally suited to off-road vehicle recovery. Able to be used at any angle, and unrestricted by rope length, this versatile winch features a spare set of safety pins and enables the wire rope to be fed through 2 sets of wear resistant interlocking jaws by a single operating lever.
Features
- Light weight corrosion free aluminium body
- Wear resistant alloy steel jaws
- Safety pins to prevent overloading
- UT13 & UT16 models fitted with carry handle
- Rope reeler allows convenient storage of wire rope when not in use
- All winches fully tested>
|
Model
|
UT08
|
UT16
|
UT32
|
|
Part
No
|
48612
|
48613
|
48614
|
|
Lifting
Capacity
|
800kg
|
1.6t
|
3.2t
|
|
Hauling
Capacity (tonnes)
|
1.25
|
2.5
|
5.0
|
|
Operating
Effort (at rated load) (kg)
|
29
|
42
|
45
|
|
Operating
Speed (mm/stroke)
|
>52
|
>52
|
>52
|
|
Handle
Length (mm)
|
740
|
1120
|
1120
|
|
Rope
Length (m)
|
20
|
20
|
10
|
|
Rope
Diameter (mm)
|
8.3
|
11
|
16
|
|
Rope
Safety Factor
|
5:1
|
5:1
|
5:1
|
|
Net
Weight (kg)
|
6
|
11
|
22
|
back
|
Every care has been taken to ensure the accuracy of information contained in this document. which supersedes earlier publications, however PWB Anchor Ltd shall not be liable for any loss or damage howsoever caused arising from the application of such information.
PWB Anchor Ltd maintains a policy of progressive development of products and reserves the right to alter without notice, the specifications shown within this document.
|
|
|
